近年來，透水地坪材料密封固化劑已廣泛用于工廠車間。效果非常好，受到消費者的高度贊揚。車間透水地坪材料密封固化劑地板施工應考慮哪些因素?下面就由上海藝術地坪供應商小編為大家介紹一下吧!
在建造車間時應考慮以下因素：
1.啟動車間也很重要。它是檢查地板的磨損程度。大磨損的地方通常是車輛的通道和其他常用的地方。用于混凝土密封固化劑地板的施工。加強劑量，特殊處理。
2.對于其他貨物和流動裝配區域，應考慮物品對地面的影響，并加強混凝土密封固化劑的用量。
3.地板質量會因外部溫度的變化而發生變化，因此在車間施工中，應根據設備，產品及附近區域的溫度控制混凝土密封固化劑的用量。
4.在施工過程中的防滑要求也是必不可少的，通常在使用混凝土密封固化劑后，為了提高亮度，會加入光亮劑。使用雙奇時，無需再添加光亮劑，亮度更高，達到防滑要求。
5.根據車間的使用情況，考慮是否存在潛在的化學反應，或與化學品直接接觸會導致地面腐蝕，因此有必要根據情況準確建造。
6.許多行業對車間的衛生要求嚴格。例如，食品，化妝品等，都需要符合國家GMP標準。因此，地面應保持衛生，并達到無塵效果。制作混凝土密封固化劑時，應均勻，防止粉塵和沙子控制。
In recent years, the sealing curing agent of permeable floor material has been widely used in factory workshops.The effect is very good, highly praised by consumers.What factors should be considered in floor construction of pervious floor material sealing curing agent?Below by Shanghai art floor xiaobian for you to introduce it!
The following considerations should be taken into account when building a workshop:
It is also important to start the workshop.It is to check the wear of the floor.Areas of heavy wear are usually vehicle access and other common areas.Used for concrete sealing curing agent floor construction.Enhanced dose, special treatment.
2. For other goods and mobile assembly areas, the impact of items on the ground should be considered, and the dosage of concrete sealing curing agent should be strengthened.
3. Floor quality will change with the change of external temperature, so in the workshop construction, the amount of concrete sealing curing agent should be controlled according to the temperature of equipment, products and the surrounding area.
4. The requirement of anti-slip in the construction process is also essential. Usually after the concrete sealing curing agent is used, brightener will be added in order to improve the brightness.When using double odd, no need to add brightener, brightness is higher, to meet the requirements of anti-slip.
5. Based on the use of the workshop, consider whether there is a potential chemical reaction or whether direct contact with the chemical will lead to ground corrosion. Therefore, it is necessary to build accurately according to the situation.
6. Many industries have strict requirements on the sanitation of workshops.For example, food, cosmetics, etc., all need to comply with the national GMP standard.Therefore, the ground should be kept clean and dust-free.When making concrete sealing curing agent, it should be even to prevent dust and sand control.
