今天讓我們跟隨小編的腳步來了解一下上海藝術地坪的后期的養護及要求的相關文章，希望我們的分享能夠讓您較好的了解藝術地坪。
上海藝術地坪也叫壓模地坪、壓花地坪，是采用特殊耐磨礦物骨料，高標號水泥、無機顏料及聚合物添加劑合成的彩色地坪硬化劑，通過壓模、整理、密封處理等施工工藝使混凝土表面產生不同凡響的石質紋理和豐富的色彩效果。
一、上海藝術地坪后期養護及要求：
1.硬化壓模地坪材料的施工一般在室外進行，應防止在雨天及大風天氣進行，施工環境溫度一般在日均溫度5攝氏度以上。
2.沖洗地坪表面：待硬化壓模地坪完全干燥凝固成型至少3-4天后方可用水或去污劑清洗表面，清洗表面在保證整個地坪清洗程度一致，否則會造成地面顏色深淺不一。
3.涂敷密封劑：待清洗硬化壓模地坪表面完全干澡無水分后至少一天以上方可涂敷液體亮光劑達到養護和增強光亮作用，使藝術壓模地坪表面防污染防滑并再次強化。完成后藝術壓模地坪除了很好的裝飾性以外，其物理性能也非常穩定。
4.藝術壓模地坪養護階段必須防止人員隨便進出或進行其它項目的施工操作。
構成材料及工具包括：彩色強化劑、著色脫模粉、保護劑、乳液、壓模及紙模模具、專用工具等。
Today let's follow the footsteps of xiaobian to understand the later maintenance and requirements of Shanghai art floor related articles, hope that our share can let you better understand the art floor.
Shanghai art floor also called die floors, embossed floor, is the use of special mineral aggregate wear-resisting, high strength cement, inorganic pigments and the synthesis of polymer additive color floor hardener, through construction techniques such as molding, sorting, sealing make concrete surface produces outstanding stone texture and rich color effect.
I. Post-maintenance and Requirements of Shanghai Art Floor:
1. The construction of hardened and pressed floor materials is generally carried out outdoors. It should be prevented in rainy and windy days.
2. Flush the floor surface: it can be cleaned with water or detergent at least 3-4 days after the hardening and pressing floor is completely dry and solidified. The cleaning surface should be consistent throughout the floor, otherwise the color of the floor will be different.
3. Sealant coating: it shall be applied at least one day after the surface of the hardened and pressed floor is completely dry without water to maintain and enhance its brightness, so that the surface of the artistic pressed floor can be anti-pollution, anti-slip and strengthened again.After the completion of the art molding floor in addition to a good decorative, its physical properties are very stable.
4. During the maintenance phase of the art pressed floor, personnel must be prevented from entering or leaving the floor or carrying out other construction operations.
The materials and tools include: color intensifier, color demoulding powder, protective agent, emulsion, pressing die and paper die, special tools, etc.
